关注新智造网

HID氙气大灯--9006氙气灯泡-HB4疝气灯-汽车大灯 各K数都有

HID氙气大灯--9006氙气灯泡-HB4疝气灯-汽车大灯 各K数都有
  • 单      价:¥160 起 订 量 :1件
  • 品      牌:定制加工
  • 产      地:广东-广州
  • 发布时间:2021-12-28
  • 收藏产品:
联系人:陈桂双
联系方式: 点击留言
联系人
联系方式
公司
留言内容
×
FX104T02F052A3N-HS推拉自锁连接器FX104T02C042A2N- HS航空插头座

FX104T02

¥90/套

1套起订

查看详情

 油雾过滤器滤芯SAGL--150H永科供应

油雾过滤器滤芯

¥1/个

100个起订

查看详情

碳素钢丝骨架PE排水管 市政用耐压抗腐蚀

碳素钢丝骨架PE

¥89/个

50个起订

查看详情

高压放大器HA-30K (40Hz-800Hz,30kVp-p)

高压放大器HA-

电议

1台起订

查看详情

S24系列单臂连续式树脂砂混砂机

S24系列单臂连

¥10000/台

1台起订

查看详情

GS系列高效转子混砂机

GS系列高效转子

¥10000/台

1台起订

查看详情

S14系列转子混砂机

S14系列转子混

¥10000/台

1台起订

查看详情

铸造用粘土砂工艺砂处理设备S1320碾轮混砂机设备

铸造用粘土砂工艺

¥10000/台

1台起订

查看详情

HID氙气大灯--9006氙气灯泡-HB4疝气灯-汽车大灯 各K数都有








一套包括两个安定器+2个灯泡(H4-3的有线束)+2个支架+说明书本公司长期特价销售HID高亮度汽车氙气大灯!产品型号齐全,包括(H1,H3,H4-2,H4-3,H7,H11,9004,9005,9006,9007,D2C/R/S)本产品质量保证期为一年保修包换。本产品安装方便,决不破坏原车电路,广大车友可放心使用。     厂家直销,质量保证,价格优惠。有白色,蓝色,粉色,绿色,黄金光,紫色可选。黄金光加10元。氙气大灯产品特点:
安 全:
  不会因为泡水或有水气因素而产生爆裂。当发生事故时,安定器内的检测电路能立刻把高压电切断,以保护人员安全;高绝缘性的电线以及防电磁干扰的设计使你高枕无忧。
长 寿 命:
  寿命长达3000小时,大幅超越汽车夜间行驶的总时数。
省 电:
  只要35W的电力,大大减轻汽车电力系统的负荷,电力损耗节省40%,相应提高了车辆性能,节约能源。
超 亮 度:
  亮度提升300%,照得更高、更广、更远,让您行车更安全。
色温性好:
  有4300K-12000K,接近日光,最适合人眼的接受度和舒适度,可以有效减少驾驶员的视觉疲劳, 对于驾车安全性也间接有益。色温包括:
3000K-黄金光,穿透力极强,适用雨雾天,常用于雾灯 4300K-黄光,与普通灯相似,穿透力强               6000K-光全白,像正午日光,视觉舒适,是穿透力和舒适度最好的一个结合点,但是雨雾天,穿透力一般8000K-白中带蓝,穿透力较6000K弱,建议不要使用超过此K数灯泡  10000K-白偏蓝,K数越高,发出的光越蓝,雨雾天的穿透力越弱12000K-偏蓝紫色,装饰作用,雨雾天行车不便  安装方便:
  只需要把氙气灯头插入原有灯孔,固定安定器,接上电源线即可;不需改动车辆原有部件!
性能:
  防水:符合DIN40050法规标准
  防尘:符合SAEJ575法规标准
  防震:符合DID40046法规标准
  功率:12V/35W
  高亮度:3200LM
  使用寿命长:是普通卤素灯的10倍以上HID标准:
一、工作电压
  宽电压范围能正常工作。在8-18V的直流电压下,安定器都能工作。
二、保护功能
1.超压保护
   为了防止在电压过高时烧毁灯泡和让车主及时发现车辆故障,当电源直流电压超过18V时,
安定器自动停止工作,并使输出功率不超过45W,保护安定器,避免HID灯泡损坏。
2.欠压保护
   为了防止灯泡将汽车电池的电能全部用完,造成汽车不能正常启动,当电源直流电压低于8V时,安定器自动停止工作,避免损坏。
3.空载保护
   当安定器未接灯泡,处于空载状态时,安定器自动停止工作,避免高压电伤害工作人员。
4.短路保护
   当安定器遇意外情况,处于短路状态时,安定器自动停止工作,避免损坏。
5.反接保护
   当安定器在安装时,操作人失误使输入电源正负极接反时,安定器自动停止工作,保证安定器不损坏。
6、防水、防尘、防震性能好 HID Conversion Kits(9006-Thick)
12V: 35W/55W
24V: 35W/55W
Factory, delivery time< 2 days
CE, E-MARK, SGS
Defective rate< 0.5%
Warranty=18months
Packing: 46.5cm*33.5cm*38cm G. W: 12kg 10PCS/CTN
OEM and ODM are also available.

Specification:
Initial Voltage: DC 23000V
Steady Voltage: 85V
Luminous flux: 2500~3500 lumen
Lifetime: 3500hours
Operating temperature: -40 degree~ +105 degree
Color temperature: 3, 000K-30000k
Output power in stable state: 35W /55W
Wiring: High temperature-resistant, high voltage-resistant
Cover: Crystal glass tube of UV-CAT anti-ultraviolet
Quality warranty: 18month warranty
HID Advantages:
Extension of life span of battery due to the low power consumption
Excellent in signal and lane reflection due to the high-color temperature
Looks more luxurious than halogen lamp
Fully compatible with original halogen system, easy to install
Small orders are accepted
With CE & E-MARK certificate
Waterproof and shockproof with perfect performance
Super brightness: Four-time brightness than normal halogen lamp

Models:
Single Beam: H1, H3, H4-1, H7, 9004-1, 9005, 9006, 9007-1, with 2 ballasts and installation clamps.
Hi-lo Beam: H4-2, 9004-2.9007-2 HID for low beam and halogen bulb for high beam, with 2 ballasts and installation clamps.
Telescope: H4-3, 9004-3, 9007-3, single HID can switch between high beam and low beam, with 2 ballasts and installation clamps.
Bi-xenon: H4-4, 9004-4, 9007-4, 2 HID bulbs on each bulb, which works for high and low beam, with 4 ballasts and installation clamps.

Color Available:
3000k~golden color
4300k~yellow white
6000k~shallow yellow
8000k~blue white
10000k~Cambridge blue
12000k~ Bluish-purplish
15000k~blue red
20000k~pink
25000k~mauve
30000k~purple

1. What is HID?
HID lamp (High-Intensity-Discharge) is the top product of the Metal halide lamp. Unlike Halogen lamps, HID lamps don't have a filament but create light by the arc between two electrodes. There are distinctive metals contained in the arc tube: High-pressure Xenon (99.99%), mercur and metal halide. When starting voltage is applied to the electrodes from the ballast or igniter, an arc is formed between them. The arc activates the Xenon, which in turn ignites the metal halide. The result of this action is the emission of light energy. Due to the high pressures of HID lamp operation, these wavelengths are concentrated in the visible light spectrum. We can get the desired color temperature through changing the pressure of HID lamp or the proportion of the metal halide.

OEM and ODM are also available.